THE FUNCTION BUTTON
Some of the features that you will find in the manual have been already explained, but since the
[FUNCTION] button provides access to a wide range of functions that give your instrument
extraordinary versatility, we prefer to list all the features of this section again in a step-by-step
explanation.
Switch the instrument On and press the [FUNCTION] button several times until we see all the
available functions:
Pan
Reverb Volume
Octave
Split Point
MIDI
All Local
Auto Track
Chord Type
Pedal
Play Mode
Style Accompaniment
Transpose Set
PAN
In this page you can set the stereo panoramic effect of each sound to create a nice stereo effect.
Press [FUNCTION] button to select R1. PAN?, use the [+/-] buttons to select R2. PAN? and
Lf.PAN?
R1 .PAN Right 1 Voice Pan
R2 .PAN Right 2 Voice Pan
Lf .PAN Left Voice Pan
Press [ENTER] button to confirm the section, and use the [+/-] buttons to set the pan value.
Value –64 is the maximum value to the Left and value 63 is maximum value to the Right.
To select center pan effect, value 0 (zero) press the [+/-] buttons at the same time.
REVERB AND CHORUS DEPTH
In this page you can adjust the reverb and chorus depth for the selected voice.
Press [FUNCTION] button to select R1 RevVo? Use the [+/-] buttons to select R2 RevVo?,
LF RevVo?, R1 ChrVo?, R2 ChrVo?, Lf ChrVo?
R1 RevVo? Right 1 Voice Reverb Depth
R2 RevVo? Right 2 Voice Reverb Depth
Lf RevVo? Left Voice Reverb Depth
23
To Next Page
Loading...
