CONNECTIONS
MIDI IN/THRU/OUT
he MIDI THRU connector retransmits any data from the MIDI IN directly to other MIDI
he MIDI OUT connector transmits MIDI data generated by the instrument to other MIDI
ceives the MIDI data from an external MIDI device.
is possible to connect the instrument to a computer using the USB port located on the back
and control the MIDI parameters.
, connect it to Pedal Connection 1.
the optional 3 Pedals pedalboard is used, connect the mono jack to pedal connection 1 and the
tereo jack to pedal connection 2.
udio signal out an external
mplifier, mixer console, or recording equipment. To connect the instrument in stereo to an
xternal amplification system connect both Left and Right outputs.
be plugged in for private practice, allowing you to play without
isturbing anyone else or being disturbed by outside noise. The sockets are located on the back
ft side of the instrument.
OWER ON/OFF
his switch turns the power to the instrument on or off.
T
devices.
T
instruments.
The MIDI IN connector re
USB TO COMPUTER
It
panel of the instrument
PEDALS SOCKETS
This is the connection for the pedal sets that can be used with the instrument.
If using the supplied Sustain Pedal
If
s
LINE OUT SOCKETS
There are two outputs (Left and Right) and they are used to send the a
a
e
HEADPHONES
Two sets of Headphones can
d
le
P
T
32
To Next Page
Loading...
