Orolia EdgeSync User Manual

orolia.com EdgeSync Manual rev 1 | 25
PTP Webpage Tab
PTP Dropdown selections
• Config
• Clock
• Port
• Unicast
• Unicast Nodes
• Time
• SNTP
PTP :: Config
Figure 14 PTP :: Config
The Config webpage contains the following selections, entries, and buttons:
PTP :: Config
Legend: RO = Read Only, RW = Read/Write, WO = Write Only
Labels
Access
Description
PTP Config
Main Time Constant(s)
RW
The main Time Constant used for the PTP servo after the
servo has synchronized
Range: 1 to 2147483647
Startup Time
Constant(s)
RW
The startup Time Constant used for the PTP servo before
the servo has synchronized.
Range: 1 to 2147483647
Quality Threshold(ns)
RW
Maximum variation allowed in the sync and delay request
direction, respectively, before packets are ignored.
Timing Output
Frequency Out
RW
Select Timing Frequency Output: 1544 kHz, 2048 kHz, and
10 MHz.
Apply / Clear
Apply Button
WO
Click for selection and settings to be applied to the
EdgeSync
Clear Button
WO
Click to clear the latest changes

Orolia EdgeSync Specifications

General

Brand	Orolia
Model	EdgeSync
Category	Switch
Language	English