Orolia EdgeSync - 1 Introduction; Functional Overview; Interfaces

6 | EdgeSync Manual rev 1 orolia.com
1. Introduction
Functional Overview
The EdgeSync is a small form factor, highly accurate Multi-Sync Gateway that provides IEEE 1588-
2008 PTP Grand Master and Boundary Clock functionality. IEEE 1588-2008 PTP is also known as PTP
Version 2.
Figure 1 The EdgeSync
EdgeSync gets its time from the built-in GNSS receiver or 1PPS/ToD input or IEEE 1588-2008 PTP as
input references. PTP algorithms are leveraged to deliver stringent timing for frequency and phase
profiles. Outputs include IEEE 1588-2008 PTP, selectable FREQ Out, 1PPS, and Time of Day (ToD).
EdgeSync will provide holdover depending on the chosen built-in oscillator.
Remote control and monitoring are provided over SSH, Web Interface and SNMP (v2, v3).
Interfaces
EdgeSync Interfaces are shown in following images, along with a brief description of them in the tables
below them. Detailed description of the interfaces is provided in the REF section of this User Guide