38 | EdgeSync Manual rev 1 orolia.com
Without proper authentication, the client or browser accessing EdgeSync may warn the user that the
access is “not secure” since the SSL certificate has not been authenticated. With https, all web
transactions are encrypted regardless of SSL certificate is authenticated or not.
NOTE: If an incorrect file or wrongly formatted user SSL certificate is uploaded and the web access to
EdgeSync stops working, then the user can restore to factory default https configuration from CLI
using the “HTTPS Restore” command.
System Tab
System Tab – Provides EdgeSync hardware and software information like version, Oscillator type,
GNSS Receiver type and entries, upgrade and logs.
Figure 26 System Webpage
The System Webpage for EdgeSync system and firmware information contains the following displays,
entries, and buttons:
System
Legend: RO = Read Only, RW = Read/Write, WO = Write Only
Version of EdgeSync software
To Next Page
Loading...
General