Orved Cuisson SV-41 - User Manual

Questions and Answers

B
Brooke ClarkAug 19, 2025
What to do if my Orved Cuisson SV-41 Kitchen Appliances machine is not working?
- D
  David ChoiAug 19, 2025
  First, ensure the machine is switched on using the ON/OFF main switch. Then, check the power supply by verifying the plug is correctly inserted into a working socket with the correct voltage. Inspect the power cable for any damage and check the PF3 and PF4 fuses on the power board to ensure they are intact and correctly inserted. If the issue persists, it may indicate machine damage.
C
Christina FieldsAug 21, 2025
Why is there insufficient vacuum in my Orved Cuisson SV-41 chamber?
- R
  Richard BarrettAug 21, 2025
  The vacuum percentage might be set too low; try increasing it up to 99% and use the VAC+ key for supplementary vacuum. Also, check the oil and exhaust filter of the vacuum pump. A worn cover gasket could also be the cause, so consider replacing it.
J
Joseph BooneAug 23, 2025
What to do if my Orved Kitchen Appliances bag does not maintain vacuum?
- J
  Julie TerryAug 25, 2025
  Ensure the bag is positioned centrally in relation to the sealing bar, protruding 20 mm over it. If you are using gas, make sure the bag opening is correctly fixed in the dater. The bag might be too small for the product volume. Check if the bag is perforated; if so, use a thicker bag and wrap the product. If the sealing is insufficient, increase the sealing time. If the bag is defective or dirty, use a new, clean bag. Also, the bag size should be suitable for the product dimensions.
J
Jason PhillipsAug 26, 2025
Why won't my Orved Cuisson SV-41 machine seal?
- A
  Antonio JohnsonAug 27, 2025
  Check if the sealing bar connection is dirty and clean the contacts with contact-spray. Also, if you are using gas, make sure the gas quantity is not more than 60% - reduce gas percentage if needed. Check the PF2 fuse on the power board and change it if blown. If you are using a seal bag, check if it is perforated and change it if needed.
J
Jenna WestAug 28, 2025
What to do if my Orved Cuisson SV-41 Kitchen Appliances machine does not create vacuum in chamber?
- P
  Phyllis WilliamsAug 28, 2025
  Ensure you are exerting sufficient pressure on the Plexiglas cover during appliance start-up by lowering the cover with both hands and applying more pressure. Also, check if the gas function is activated and deactivate it if necessary.
K
karen56Aug 30, 2025
What to do if my Orved Cuisson SV-41 seal seam shows burns and bubbles?
- P
  Patricia PierceAug 30, 2025
  The sealing time may be too long. Try decreasing the sealing time. If the seal seam is narrow and irregular, then the sealing time may be too short. Try increasing the sealing time.
L
Leah MeyersSep 1, 2025
What to do if the lid opens during GAS cycle of my Orved Cuisson SV-41?
- H
  Heather GoodmanSep 2, 2025
  The gas percentage might be too high. Try reducing the gas percentage.
A
Ann DunnSep 4, 2025
Why is the gas quantity in bags insufficient in my Orved Cuisson SV-41?
- R
  Robert LynchSep 4, 2025
  The gas flushing time might be insufficient, so increase the gas percentage. Check that the gas cylinder pressure is sufficient and adjust the pressure on the cylinder reducer to 1 bar. Ensure the gas nozzle is correctly inserted into the bag mouth and that cylinder valves are open, with the pressure reducer set to 1.0 bar.
T
tuckerjaimeSep 6, 2025
What to do if my Orved Cuisson SV-41 appliance enters “alarm status”?
- S
  Sarah RiceSep 6, 2025
  The appliance may be overheating. Switch it off and then switch it on again after waiting 15 to 20 minutes.
J
Joshua CookSep 9, 2025
What to do if the Plexiglas cover does not close on my Orved Cuisson SV-41?
- O
  Olivia HallSep 9, 2025
  The cover gasket might be worn, so try changing it.

Summary

Introduction to the Vacuum Packer

Important Information

Crucial details for using, preserving, and disposing of the appliance, including manufacturer contact info.

Manual Preservation Guidelines

Guidelines for handling and keeping the manual in good condition to ensure its longevity.

General Information

Manufacturer & Appliance Identification

Details about the manufacturer and how to identify the specific machine model and its features.

Technical Service and Warranty

Covers warranty terms, conditions, how to report defects, and ordering spare parts.

Safety Regulations and Warnings

Symbols and Hazard Meanings

Explanation of safety symbols used throughout the manual to indicate risks and important information.

Machine Operation Safety

Details risks associated with operating the machine and operator requirements for safe use.

Electrical Safety Precautions

Specific warnings and precautions related to electrical safety during operation and maintenance.

Safety During Maintenance & Repair

Safety rules for servicing and repairing the machine, including electrical hazards.

Modification, Fire, Cleaning & Gas Use Safety

Precautions for modifications, fire prevention, safe cleaning practices, and gas usage hazards.

Preliminary Information

Technical Data Specifications

Detailed technical data and specifications for the appliance models SV-31 and SV-41.

Intended Field of Use

Defines the intended purposes and applications for the vacuum packer machine.

Handling and Unpacking

General Handling and Storage Warnings

Precautions during transport, unpacking, and storage, including environmental conditions.

Unpacking Procedure

Step-by-step guide on how to safely unpack the appliance and check for damage.

Installation

Appliance Description and Components

Overview of the machine's parts, features, and construction for both SV-31 and SV-41 models.

Power Supply Voltage and Connection

Instructions for connecting the machine to different power supplies and checking pump rotation direction.

Appliance Overheating Protection Safety Device

Details the safety device preventing fire hazards from overheating of sealing bar or vacuum pump.

General Instructions for Use

Essential rules and procedures for operating the appliance safely, including electrical system safety.

Control Panel and Functions

Control Panel Overview

Explains the layout and function of each button, display, and indicator on the control panel.

Function Definitions

Detailed explanations of core functions like VAC, VAC+, GAS, SEAL, PUMP, and DAT.

Operation and Programming

Programming VAC, GAS, SEAL, and DATE Functions

Guide to programming the machine's core functions for specific packaging needs via the control panel.

Work Cycle Operation and Gas Control

Procedures for starting, ending, interrupting cycles, and activating/deactivating gas function.

Pump Function Programming

Instructions for using the pump function for special packaging tasks like vacuum packing embossed bags.

Maintenance

General Maintenance Warnings

Essential safety precautions before performing any maintenance, emphasizing qualified personnel and power disconnection.

Programmed Maintenance Schedule

A schedule of maintenance tasks based on usage frequency or time for optimal machine performance.

Care and Cleaning Procedures

Procedures for cleaning different parts of the vacuum packaging machine, including safety notes.

Routine Maintenance

Sealing Bar Teflon Band Replacement

Step-by-step guide to replacing the Teflon band on the sealing bar when it shows wear.

Pump Oil Change Procedure

Instructions on how to drain and refill the vacuum pump oil, including frequency and oil type.

Pump Oil Filter Replacement

Procedure for replacing the oil filter of the vacuum pump, emphasizing qualified personnel.

Lid Gasket and Silicone Replacement

Guide to replacing the vacuum chamber lid gasket and red silicone strip for proper sealing.

Wiring Diagrams and Fuse Replacement

230 V Wiring Diagrams

Electrical schematics for the 230V version of the machine, detailing component connections.

110 V Wiring Diagrams

Electrical schematics for the 110V version of the machine, detailing component connections.

Fuse Replacement Procedure

Instructions and safety precautions for identifying and replacing blown fuses in the machine.

Troubleshooting

Machine Not Working Issues

Solutions for common issues where the machine fails to operate, like power or damage problems.

Vacuum Creation Problems

Troubleshooting steps for low or no vacuum creation, like gasket or pump issues.

Sealing Quality Issues

Common causes and fixes for faulty or weak seals, including time and gas settings.

Disposal and Spare Parts Information

Machine and Part Disposal Guidelines

Guidelines for environmentally responsible disposal of the machine and its components.

Pneumatic Springs Disposal Warning

Specific instructions for safely disposing of high-pressure lid springs.

Spare Parts Ordering Information

Information required when ordering replacement parts for the machine.

Main Spare Parts List

Spare Parts Identification Diagram

Illustrated diagram showing numbered spare parts for identification and ordering.

Orved Cuisson SV-41 Specifications

General

Type	Sous Vide Cooker
Category	Kitchen Appliances
Temperature Accuracy	±0.1°C
Control	Digital
Display	LCD
Temperature Range	20°C to 95°C (68°F to 203°F)
Water Capacity	Up to 40 liters
Power	2000 W