Monitor Settings
38
Figure 5.2-12 Prompt for File Writing
Second, use
USER LUT
tool to activate LUT to current scene.
Operation: scroll the joystick right to access a scene, and press
straight down to load the
Tools
pane for the scene. Then, add the
USER LUT
tool, press stratight down to enable this tool, for example,
select
ID
item as
LUT1
, and
INTENSITY
as
100%
, thus, it will apply
LUT1
to current scene display, as shown in Figure 5.2-13:
Figure 5.2-13 User LUT Tool
After activating a LUT file, it will be loaded to the image display
immediately, as shown in Figure 5.2-14:
To Next Page
Loading...
