Scenes and Tools
53
useful to identify over exposed areas (exposure). This is a quick way
to gauge the exposure levels of an image in a clear way.
Choose
FLASE COLOR
tool to the current scene, and activate the
FALSE COLOR
tool. You can customize some parameters such as
BLACK CLIP
,
NEAR BLACK
in
CUSTOM
style.
For example:
Add and Enable a
FALSE COLOR
tool, set
FALSE
COLOR
SETTING
item as
SPECTRUM
, as shown in Figure 6.1-8:
Figure 6.1-8 Comparison Mode- Original Image and Normal Mode
Image
The LOOK tool is incompatible with the False Color tool. That is,
enable the LOOK tool, the False Color tool will be disabled
automatically, and enable the False Color tool, the LOOK tool will be
disabled automatically.
2. ZEBRA
The
ZEBRA
function is used to display images on the screen with a
zebra pattern to adjust the camera exposure parameter. It will
compare the signal luminance with the zebra parameters. You can
set two limitations as
TONE1
and
TONE2. TONE1
is limited between
TONE1 MIN
and
TONE1 MAX
,
TONE2
is limited
between
TONE2
MIN
and
TONE2 MAX
. The relevant image area will be filled with a
white and black stripe zebra pattern if the luminance is in the range of
TONE1.
Besides, it will be filled with a white and blue stripe zebra
To Next Page
Loading...
