OSEE T5+ - Page 60

Scenes and Tools
54
pattern if the luminance is in the range of
TONE2
.
For example
, set
TONE1 MIN
as 0% and
TONE1 MAX
as 4%,
TONE2 MIN
as 97% and
TONE2 MAX
as 100%, the compared
results are as shown in Figure 6.1-9, the special Area is filled with a
zebra pattern.
Figure 6.1-9 Illustration for ZEBRA Function
3. WAVEFORM
Waveform displays the luminance level of the input signal on a graph,
matching with the image from left to right.
 WAVEFORM SIZE
Set
EXPOSE

WAVEFORM

SIZE
item to adjust the size of the
waveform, there are three kinds of sizes for waveform:
 Small size waveform: set
SIZE
item as
SMALL,
and this kind of
waveform could be located in any one of the 4 positions listed in
LOCATION
item;
 75% waveform: set
SIZE
item as
LARGE,
and this kind of
waveform is located in the center of the screen, and it can’t be
moved;