oset MX-10 Mk.1 - Suspension System Adjustments; Rear Suspension Tuning; Front Suspension Fork Adjustments

18
Adjustment ring
Rebound Dial
Please refer to the secon on assembling your OSET bike (page 11) for informaon on
installing the front wheel, and reverse the instrucons for removal.
Your OSET bike is equipped with a single coil
spring type rear shock. For a harder/ser ride
at the rear ghten the adjustment ring in a
clockwise direcon.
For a soer ride, loosen the adjuster by turning
an-clockwise. It also features a very eecve
rebound dial.
Oponal springs are available from your OSET
dealer to adjust the spring rate.
Entanglement Hazard. Turn power o before starng
work.
WARNING
OSET bikes feature adjustable front and rear suspension. The available adjustability is a great
feature. Separate owner’s manuals are provided. Please read for further informaon on how to
best set up the suspension.
The front suspension is an ‘air’ fork. A specic air pump is required to add pressure which can
be purchased from your local OSET dealer. The fork is also adjustable for rebound & preload
via two simple dials located on the top of the fork.
FRONT SUSPENSION FORKS
Preload Dial. Rebound Dial. Suspension Air Pump.
REAR SUSPENSION