oset MX-10 Mk.1 - Recommended Torque Values

10
Failure to properly assemble and adjust your bike prior to use may result in an accident
resulng in death, serious injury and/or property damage.
If you purchased your OSET in the carton, please carefully follow the instrucons below and
any supplemental instrucons to nish the assembly and adjustment of your OSET.
NOTE
DANGER
RECOMMENDED TORQUE VALUES
Where there are no other torque values stated please
use the recommended torque value table shown here.
1. Remove your OSET & Accessory pack from the box and check contents against the
following list:
1x Bike
1x Accessory Box containing:
1x Front mudguard (fender)
1x Baery charger c/w power lead & manual (if supplied)
1x Number board
4x Black cable es
1x Hex Key set (Allen keys)
1x Adjustable Spanner
1x Manual for air forks
1x Manual for rear shock
2. Place your OSET on a solid & level stand, with both wheels o the ground.
Thread Size
Recommended
Torque Nm
M3 1
M4 2
M5 4
M6 7
M8 17
M10 33
M12 58