oset MX-10 Mk.1 - Long Term Storage; After Storage

27
LONG TERM STORAGE
If you do not plan to use your OSET for an extended period of me (1 month or more):
• Fully charge the baeries before storing.
• Remove baeries from the bike.
• Check baeries at least once a month.
• Store the baeries in a cool (50º to 70ºF, 10º to 21ºC), dry place. Avoid direct expo-
sure from the sun.
• Check tyres are adequately pressurised to prevent cracking.
• Lubricate chain.
• Store the bike in a dry locaon, ideally on a work stand
If you have any quesons about the baeries or their usage, please do not hesitate to
contact your local dealer or the OSET Customer Service Department.
AFTER STORAGE
If your bike has been stored for a over 1 month we suggest you carry out some checks
before riding it.
• fully charge and Ret the baeries.
• Check key fasteners are correctly ghtened: Sprocket bolts, wheels nuts, bar and
stem bolts, brake levers and callipers.
• Check throle freely returns to o posion.
• Check chain adjustment.
• Check brakes work and wheels spin freely.
• Check the speed, power and response seng.
• Check the res for proper inaon. Also, inspect the res for damage.
• Check safety lanyard operates correctly
TRANSPORT
When your OSET is being transported ensure suitable restraints are used to prevent the bike
from falling over or rolling away. If using any carrier, remove baeries from the bike and
check the carrier is rated to carry the weight of your OSET.