23
Your OSET features a 48v drive system, for use with a sealed 48V lithium baery. Under NO
circumstances should this baery box be opened by anyone other than a trained OSET
technician. Doing so can damage the baery and/or bike & will void any warranty.
OSET recommend using a ‘mulmeter’ to monitor the health of the baery. You will be able
to easily and instantly see the charge of the baery.
In order to test the baery voltage using a mulmeter,
connect the negave & posive probes to a pair of pins
on the discharge port on the baery as shown.
A mulmeter is also very useful in diagnosing any
electrical problems on the bike.
When tesng the baery voltage, you should have a
reading of between 36.0 & 54.4V depending on the
state of charge of the baery. If you read anything
outside of this range, please disconnect the baery
immediately and contact your OSET dealer, importer or
OSET customer services.
If the casing of the baery is damaged call OSET for assistance.
DO NOT USE IF BATTERY IS DAMAGED
Your OSET baery is not a serviceable item, opening the casing will invalidate your
warranty.
BATTERY DISPOSAL
Over me your lithium baery pack’s capacity will reduce, unl it reaches the
end of its service life. This is perfectly normal & to be expected.
Baery packs contain a large amount of valuable raw materials & plascs
which can all be recycled if disposed of correctly. Do no dispose of the baery
with general household waste.
Contact your local refuse handling center for more details on baery recycling and disposal. If in
doubt, please contact OSET for help & advice with disposing of your old baeries.
WEEE Producer Environment Agency Reference Number: WEE/MM4649AA
WEEE Compliance Scheme Registraon Number: CD01/00956
Baery Producer Environment Agency Reference Number: BPRN06922
Baery Producer Compliance Scheme Registraon Number: BBCD193
DO NOT DISASSEMBLE
Failing to adhere to this can cause irreparable damage and lead to possible injury.
DO NOT TOUCH ELECTRICAL CONTACTS