oset MX-10 Mk.1 - Rider and Bike Safety Responsibilities; Pre-Ride Checks and Safety Attire; Operational Laws and Riding Conditions

7
Always follow the Pre-Ride Checklist before every ride.
Do not operate your OSET if any damage is apparent. Immediately contact your authorised
OSET retailer/distributor or OSET Customer Service.
Supervision: An adult must ALWAYS assess and approve the riding condions and the
bike preparedness before the bike is ridden. Always ensure the rider is cauous,
maintaining complete control and a reasonable speed. Ensure the terrain is suited to the
skills of the rider.
Helmets & Safety Are: Do not allow your OSET to be ridden without a helmet
approved by your countries’ governing body. Riders should also wear suitable riding
gloves, eye protecon and boots. Boots should NOT HAVE LACES. Shoe laces and loose
clothing or even long hair could potenally get caught in wheels, chains or sprockets.
Do not overload the bike: Exceeding the weight limitaons will adversely aect the
handling of the machine, and potenally cause damage.
It’s the law; obey it: Obey all laws. OSET bikes are for OFF-ROAD USE ONLY. OSET bikes
can not be used on public roads or sidewalks. The purchaser, owner, and/or riders of this
machine are directly responsible to know and obey all local, regional, and naonal laws
regarding the riding and use of this machine.
Do not sit on the bike when side stand is engaged in the downwards posion; This can
lead to damaging your machine, and yourself
Ensure charger is disconnected from bike before riding. Failure to do so will cause
damage to the bike and could result in injury.
Night me: Don’t ride aer dark or in low light condions.
Weather & Riding Condions: Bike brakes don’t work well when they’re wet. Please be
aware that distance to stop may double or triple over the distance that it takes under dry
condions. Ride more slowly and ancipate your stops by applying the brakes MUCH
earlier. Don’t allow children to ride on slopes that are too steep for their ability.
Before each ride, make sure that all bolts and nuts are fastened securely and that the
res are properly inated. Check that the throle and brake controls are operang
freely and adjust/lubricate the drive chain as necessary.
Please have your bike checked by a qualied mechanic AT LEAST once a year. It’s a small
investment in the well-being of the rider.