28
7.2.1 The Belt Clip
The Belt Clip is suitable if you want to attach the Control Unit to e.g. the waist line of
a pair of trousers or a skirt or at the lining of your pocket.
Attach the Belt Clip to your clothing, e.g.
your waistline or a pocket…
…orient the Control Unit as shown and slide
it against the Belt Clip to x the two together.
The Control Unit is held in place by magnets inside both the Control Unit and the
Belt Clip.
7.2.2 The Belt Loop
The Belt Loop is suitable if you want to carry the Control Unit on your waist and you
are wearing a belt.
Slide the Belt Loop onto your
belt as you are putting the belt on...
To Next Page
Loading...