Otto Bock ActiGait - 16.1 Ingress Protection

65
16.1 Ingress Protection
The IP (Ingress Protection) classication marked on the various parts of the Acti-
Gait® denes the degree of protection against ingress of water and particles. The
rst number denes the protection against particles and the second number denes
the protection against water.
Classication Denition
IP 54
Particles:
5: Dust protected. Ingress of dust is not totally
prevented, but dust shall not penetrate in a quan-
tity to interfere with satisfactory operation of the
apparatus or to impair safety.
Water:
4: Protected against splashing water. Water
splashed against the enclosure from any direction
shall have no harmful eects.
IP 4X
Particles:
4: Protected against solid foreign objects of 1.0
mm Ø and greater. The object probe of 1.0 mm Ø,
shall not penetrate at all.
Water:
X: Protection against ingress of water is not rel-
evant.
17. Declaration of Conformity
This device complies with Part 15 of the FCC rules and RSS-210 IC rules. Operation
is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that
may cause undesired operation.
This ISM device complies with Canadian IES-001.
This device also complies with:
• 90/385/EEC for active implantable medical devices amended by 2007/47/EC
• 99/5/EC for R&TTE.