62
NOTICE
If your seat and back upholstery become worn out or damaged,
replace it immediately.
NOTICE
Only use original packaging for shipment of the product.
2.3 Warning Symbols and Type Plates
A Type designation
B Manufacturer’s article number
C Maximum load capacity
(see Section „Technical Data“)
D Manufacturer information / address /
country of manufacture
E Serial number
F International Article Number
G Read the Instructions for Use before using
the product.
H CE marking – product safety
in conformity with EU Directives
The rear wheels are positioned according to your instruc-
tions. Before putting the wheelchair into operation, the
pre-adjusted position must be checked for tilting safety
and proper functioning by the user supported safely by
the specialist staff.
Anchoring point/securing point or securing the wheel-
chair in motor vehicles for the transportation of disabled
persons.
To Next Page
Loading...
Need help?
General
