EasyManuals Logo

Otto Bock Avantgarde T User Manual

Otto Bock Avantgarde T
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
93
Screw connections should be checked frequently, in particular when beginning to use the
wheelchair and after any adjustment. If a screw connection comes loose repeatedly, please
consult your specialist dealer.
7.2 Cleaning and Disinfection
Clean the padding and upholstery with warm water and a washing-up liquid. Remove spots with
a sponge or a soft brush. Rinse with clear water and let the components dry.

Do not use any aggressive cleansing agents, solvents, or hard brushes etc.

No wet-cleaning. Components are not machine washable.

For disinfection, water-based agents (e.g. Sagrotan original concentrate) should be
used. The manufacturer's instructions for use must be observed.

Before disinfecting, the pads and handles must be cleaned.

Plastic parts, frame parts, and the chassis and wheels can be cleaned with a mild
detergent and a damp cloth. Dry thoroughly afterwards.
(Fig. 8487)
Changing at tyres requires only the necessary tools and minimal technical skills. Users may
change tyres themselves if they wish. We recommend carrying an emergency repair kit and tyre
pump at all times (if using pneumatic tyres).
Suitable tyre pumps are listed on the order form and are supplied with the product. Alternatively,
users can keep a spray can of hardening foam (available at bicycle shops) to ll a tyre in case
of punctures.
In case of a at tyre, carefully remove the tyre from the rim using the appropriate tools.
Take care not to damage the rim or the inner tube.
Repair the inner tube according to the directions in the repair kit, or, replace the damaged
inner tube with a new one.
Before re-mounting the tyre, inspect the inner rim surface and the inside of the tyre for any
object that may have caused the puncture.
Be sure that the rim bands are not damaged. They protect the tube from being damaged by
the ends of the spokes.

Place the protective rim band over the valve. Then push the valve through the rim. Screw on
the valve nut. The rim band can then be easily applied.
Ensure that all spoke ends are covered.

Table of Contents

Other manuals for Otto Bock Avantgarde T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Otto Bock Avantgarde T and is the answer not in the manual?

Otto Bock Avantgarde T Specifications

General IconGeneral
BrandOtto Bock
ModelAvantgarde T
CategoryWheelchair
LanguageEnglish

Related product manuals