92
7.1 Maintenance
Your wheelchair has been provided with the CE marking. The manufacturer herewith guarantees
that this medical product as a whole conforms to the requirements of the European Directive for
Medical Products 93/42/EEC.
The proper function of the wheelchair, especially of the wheel locks, should be checked before
every use. Safety nuts should be used only once. If they have been loosened several times, these
nuts must be replaced.
If you notice any defects, please contact your authorized specialist dealer immediately in order
to have them corrected. This is particularly important if you notice that the driving characteristics
change or the wheelchair becomes less stable.
The
functions described in the following list must be veried by the user at the specied intervals.
Function test of the wheel locks/brakes X
Sagging of the seat or back upholstery X
Check stability of footplate X
Visual inspection of wear parts
(e.g. tyres, bearings)
X
Dirt on bearings X
Push rings for damages X
Air pressure (see indication on tyre) X
Folding mechanism for wear and tear X
Spoke tension of the rear wheels X
Screw connections X
To ensure smooth operation at all times, the following precautions and cleanings should be car-
ried out. Users may carry these out by themselves.
•
Hair and dirt particles generally accumulate between the caster wheel and fork. This can
restrict the caster wheels from rotating smoothly. Remove the casters and thoroughly clean
the forks and casters using a mild household cleaner.
•
The rear wheels feature a quick-release system. To keep this system operational, ensure that
no dirt adheres to the quick-release axle or axle housing. The quick-release axle should also
be lightly lubricated regularly with resin-free sewing machine oil.
• If your wheelchair gets wet, towel-dry it as soon as possible.
• Do not use the wheelchair in salt water and keep sand or other particles from damaging the
wheel bearings.
To Next Page
Loading...
Need help?
General
