Page 18
Service Instructions B500
Settings/substitution/replacement
4.4.1.7 Rear wheels
Replacing or removing the rear wheels
- Use suitable objects, e.g., wood blocks to
secure the rear frame part against overturning
or slipping.
The wheel must rotate freely.
Removal:
- Use a crosstip screwdriver to unscrew the
protection cap screwed to the rim
- Use a size 5 Allen wrench to unscrew all four
screws which hold the wheel, and remove
the wheel
Installation:
- Mount the wheel and tighten all four screws
using a size 5 Allen wrench
- Screw the protection cap to the rim using
a crosstip screwdriver
Repair instructions on how to replace the outer covers or the inner tubes of pneumatic tires.
Refer to the sections 4.4.1.6 on „Front wheels“.
To Next Page
Loading...
