Page 29
Service Instructions B500
Settings/substitution/replacement
Replacing the lateral elements
- Undo the screw at the bottom on the side of
the lateral element retainer (see arrow)
- Slide out the lateral element
This screw is also used for adjusting the height of
the lateral element.
Replacing the clothing protection
- Undo the two screws (see arrows)
- Replace the clothing protection
Replacing the arm cushions
The arm cushion of the lateral element is fastened
to the lateral element rod assembly using two
headless setscrews.
- Undo the headless setscrews
- Replace or move the arm cushions
(to improve the setting for the user)
4.4.1.11 Lateral elements
To Next Page
Loading...
