Page 28
Service Instructions B500
Settings/substitution/replacement
Hip belt
The hip belt is available for both seat versions, and
it is fastened to the sides in a similar way as the
safety harness although it has no additional
fastening at the rear seat frame.
In a standard seat, the belt is secured and
screwed to the end cover using a lug with an
eyelet.
In a Recaro seat, the hip belt is fastened to the
sides such as a safety harness.
- Fasten the belt’s two other ends to these
boreholes
- Install the lining and the adjusting knob
To Next Page
Loading...
