Page 22
Service Instructions B500
Settings/substitution/replacement
Adjusting the seat tilt
Seat tilt is adjusted by using the two front seat
lugs. These seat lugs have several boreholes
located at their lower ends.
The seat tilt of the seating unit is modified by using
another borehole.
- Undo the screwed connections which are
used to connect the seat lugs to the adapter
lugs
- Push the seating unit up or down to obtain
the desired seat tilt
- Screw the seat lugs to the adapter lugs
Replacing and adjusting the lateral element
retainer
The fastening is located to the rear of the cross
struts on both sides.
- Remove seat cushion and seat section
- Undo the two headless setscrews
- Remove or readjust the lateral element
retainer
To Next Page
Loading...
