Otto Bock Ventus - Table of Contents

Foreword1
5..............................................................................................................................................................
Intended use2
5........................................................................................................................................................
Indications for use2.1
5................................................................................................................................
Indications, contraindications2.2
5.................................................................................................................
Qualification2.3
5.........................................................................................................................................
Safety3
5....................................................................................................................................................................
Explanation of warning symbols3.1
5..............................................................................................................
General safety instructions3.2
6.....................................................................................................................
Safety Instructions for Assembly3.3
6.............................................................................................................
Further information3.4
6................................................................................................................................
Nameplate3.5
6...........................................................................................................................................
Delivery4
7.................................................................................................................................................................
Scope of delivery4.1
7..................................................................................................................................
Options4.2
7...............................................................................................................................................
Storage4.3
7...............................................................................................................................................
Preparing the product for use5
7...........................................................................................................................
Assembly5.1
7.............................................................................................................................................
Settings6
8................................................................................................................................................................
Prerequisites6.1
8........................................................................................................................................
Adjusting the drive wheels6.2
8.....................................................................................................................
Adjusting the depth of the drive wheels6.2.1
9....................................................................................................
Adjusting the sliders on the frame6.2.1.1
9...........................................................................................................
Adjusting sliders with shock absorber system6.2.1.2
9...........................................................................................
Adjusting the seat height and seat inclination6.2.2
10..........................................................................................
Adjusting the height of the drive wheels6.2.2.1
10.................................................................................................
Adjusting the height of the drive wheels in the shock absorber system6.2.2.2
10.......................................................
Adjusting the drive wheel camber6.2.3
11..........................................................................................................
Adjusting the 0°/3°/6°/9° drive wheel camber6.2.3.1
11.........................................................................................
Adjusting the track width (additional adjustment)6.2.4
12.....................................................................................
Adjusting the track6.2.5
14..............................................................................................................................
Adjusting the quick-release axle6.2.6
14............................................................................................................
Adjustments in the case of a wheelbase extension6.2.7
15...................................................................................
Adjusting the caster wheels6.3
16..................................................................................................................
Adjusting the caster journal angle6.3.1
16..........................................................................................................
Changing the installation position of the caster wheels6.3.2
18............................................................................
Adjusting the wheel locks6.4
19.....................................................................................................................
Adjusting the knee lever wheel locks6.4.1
19.....................................................................................................
Adjusting the scissor wheel locks6.4.2
19..........................................................................................................
Special requirements for adjustments6.4.3
20....................................................................................................
Adjusting the back support6.5
20...................................................................................................................
Adjusting the back support height6.5.1
20.........................................................................................................
Adjusting the back support angle6.5.2
20..........................................................................................................
Adjusting the push handles6.5.3
21..................................................................................................................
Adjusting the back support upholstery / seat upholstery6.6
21...........................................................................
Adjusting the back support upholstery6.6.1
21...................................................................................................
Adjusting the seat upholstery6.6.2
22................................................................................................................
Adjusting the leg supports6.7
23....................................................................................................................
Adjusting the lower leg length6.7.1
23...............................................................................................................
Adjusting the support angle6.7.2
24..................................................................................................................
Installing and adjusting the lateral heel blocks6.7.3
24........................................................................................
Adjusting the side panels6.8
24.....................................................................................................................
Adjusting the “height-adjustable” arm support6.8.1
24........................................................................................
Adjusting the “padded” arm support6.8.2
25......................................................................................................
Adjusting the “standard” and “clothing guard” side panels6.8.3
25.......................................................................
Installing and adjusting the swivel unit and forearm supports6.8.4
26....................................................................
Table of contents
3Ventus
Table of contents