Otto Bock Ventus - Appendices; Required Tools; Screw Connection Torque Values

12 Appendices
12.1 Required tools
The following tools are required for adjustments and maintenance work:
• Allen keys in sizes 3, 4, 5
• Ring and open-end wrenches in sizes 10, 13, 19, 24 and 27
• Socket wrenches in sizes 10, 13 and 19
• Phillips head screwdriver (size: 2)
• Flat screwdriver
• Torque wrench (measurement range 5-50 Nm)
• Measurement equipment: folding rule, spirit level, try square
• Liquid thread lock, "medium" and "strong"
12.2 Torque values of the screw connections
Unless otherwise specified, screw connections are tightened with the following torque values:
• Thread diameter M4: 3Nm
• Thread diameter M5: 5Nm
• Thread diameter M6: 10Nm
• Thread diameter M8: 25Nm
36
Appendices
Ventus