Outback Power Systems MX60 - Programming the aux MODES; Manual; Vent Fan

25
OutBack Power Systems Inc.
Programming the AUX MODES
Press the <ON> or <OFF> soft keys to manually
activate or deactivate AUX MODE. Press the <NEXT>
soft key to view the Vent Fan screen. To view other
screens, continue to press the <NEXT> soft key.
The Vent Fan helps remove hydrogen from the bat-
tery room. The ventilation fan referred to here is not
the same as the MX60 cooling fan. Press the <VOLT>
soft key to determine the battery voltage that will
activate the AUX MODE and start the fan.
Adjust the voltage level using the < - > and < + >
soft keys. Press the <BACK> soft key to return to the
Vent Fan screen.
AUX MODE
Manual
On
EXIT NEXT ON OFF
AUX MODE
Vent Fan
On
EXIT NEXT VOLT
VENT FAN VOLTS
> 14.4
BACK - +