User’s Manual of OWON Colour Digital Storage Oscilloscope
42
5. Press the F4 menu selection button and choose Auto for Mode.
6. Press the F5 menu selection button to next menu.
7. Press the F2 menu selection button and choose DC for Coupling. The display in
the screen is as Fig.31.
8. Press the F 3 menu button to select Holdoff ,use trig level knob to ajust
Holdoff.
9. Press the F1 menu selection button to back to previous menu.
10. Press the F3 menu selection button and choose Falling for Slope. For
the screen display, see Fig.32.
Fig.31 Wave Form Triggered on the Rising Edge
To Next Page
Loading...
