Owon PDS5022S - To Use Executive Buttons

User’s Manual of OWON Colour Digital Storage Oscilloscope
71
To use Executive Buttons
The executive buttons include AUTOSET, RUN/STOP.
AUTOSET
This button is used for the automatic setting of all control values of the instrument to
generate the wave form suitable for observation. Press the AUTOSET button and the
oscilloscope will perform the fast automatic measurement of the signal.
The function items of AUTOSET are shown as the following table:
Function Items Setting
Acquisition Mode Current
Vertical Coupling DC
Vertical Scale Adjust to the proper division.
Bandwidth Full
Horizontal Level Middle
Horizontal Sale Adjust to the proper division
Trigger Type Current
Trigger Source Show the minimum number of channels.
Trigger Coupling Current
Trigger Slope Current
Trigger Level Mid-point Setting
Trigger Mode Auto
Display Format YT
RUN/STOP: Enable or disable the waveform sampling.
Notice: Under the Stop state, the vertical division and the horizontal time base of the
wave form can be adjusted within a certain range, in other words, the signal
can be expanded in the horizontal or vertical direction.
When the horizontal time base equal to or is less than 50ms, the horizontal
time base can be expanded for 4 divisions downwards.