Owon PDS5022S - To Perform the Automatic Measurement

User’s Manual of OWON Colour Digital Storage Oscilloscope
62
The “SYS STAT” menu is described as the following table:
Function Menu Setting Description
Horizontal Show the horizontal parameter of the channel.
Vertical Show the vertical parameter of the channel.
Trigger Show the parameters of the trigger system.
Misc Show the serial number and edition number.
After entering into the SYS STAT menu, choose the corresponding function, with the
corresponding parameters shown in the screen. If press the F1 menu selection button
and choose the function item “Horizontal”, the Horizontal System State will be
displayed in the screen. Press any other function button and exit from the SYS STAT
menu (see Fig.56).
Fig.56 Horizontal System State
To perform the Automatic Measurement
With the Measure button pressed down, an automatic measurement can be performed.
There are 20 types of measurements and 4 measurement results can be displayed
simultaneously.
The 20 types automatic measurements include frequency, cycle, average value,
peak-to-peak value , root mean square value, Vmax, Vmin, Vtop, Vbase, Vamp,
Overshoot, Preshoot, RiseTime, Fall Time, +Width, -Width, +Duty, -Duty,
DelayA B and DelayA B .