User’s Manual of OWON Colour Digital Storage Oscilloscope
57
Fig.50 Infinite Persistence Display
XY Format
This format is only applicable to Channel 1 and Channel 2. After the XY display
format is selected, Channel 1 is displayed in the horizontal axis and Channel 2 in the
vertical axis; the oscilloscope is set in the untriggered sample mode: the data are
displayed as bright spots and the sampling rate is 1MS/s and can not be changed.
The operations of all control knobs are as follows:
The Vertical VOLTS/DIV and the Vertical POSITION knobs of Channel 1are
used to set the horizontal scale and position.
The Vertical VOLTS/DIV and the Vertical POSITION knobs of Channel 2
are used to set the vertical scale and position continuously.
The following functions can not work in the XY Format:
Reference or digital wave form
Cursor
Time base control
Trigger control
Operation steps:
1. Press the DISPLAY button and call out the Display Set Menu.
2. Press the F3 menu selection button and choose the form as XY. The display
To Next Page
Loading...
