User’s Manual of OWON Colour Digital Storage Oscilloscope
69
Wave
Only show one or two periods
Show Multi-period waveforms
If you want to measure the two-channel signal, you can do as the follows:
1. Press Autoscale, the function menu will appear on the right of the screen.
2. Press F1 and choose ON.
3. Press F2 and choose Horizontal- Vertical for Mode item.
4. Press F3 and choose for Wave item.
Then the wave is displayed in the screen,showon as Fig.62.
Fig.62: Autoscale Horizontal- Vertical multi-period waveforms
To Next Page
Loading...
