User’s Manual of OWON Colour Digital Storage Oscilloscope
6
To avoid body damage and prevent product and connected equipment damage. This
product can only be used in the specified applications. Carefully read the following safety
information before using the test tool.
Warning:
When use BC(battery charge) as power supply, to avoid fire or electrical shock if a
test tool input is connected to more 42V peak (30Vrms) or on circuits of more than
4800VA:
z Only use accessory insulated voltage probes, test lead
z Before use, inspect oscilloscope probes, accessories for mechanical damage and
replace when damage.
z Remove all probes, test leads and accessories that are not in use.
z Remove computer data line
z Do not apply input voltages above the rating of the instrument Use caution when
using 1:1 test leads because the probe tip voltage will be directly transmitted to
the oscilloscope.
z Do not use exposed metal BNC or banana plug connectors
z Do not insert metal objects into connectors.
To Next Page
Loading...
