Shift + Back to activate config. To navigate through the list, use encoder 2. To change the setting use
encoder 3 and push its button to confirm setting.
- Randomize scale and root by default. If ON, the Random Generator scale and root will be
On-Yes when booting, or vice versa.
- Lock root and scale during playback. If activated, the scale and the root won’t be modifiable
during playback to avoid unintentional changes.
- OXI Split enabled. If activated, MIDI TRS would be compatible with the OXI Split increased
bandwidth. (Note: in the current HW version it is mandatory as well for Bluetooth to work)
- Send MIDI Clock. If activated, MIDI clock will be sent through TRS, USB and Bluetooth.
- Ignore MIDI Start Stop. If activated, OXI One transport won’t be controlled externally.
- PPQ MIDI Out. Changes the pulses per quarter note OXI One sends through MIDI.
- PPQ MIDI In. Changes the pulses per quarter note OXI One receives through MIDI.
- PPQ Clock Out. Changes the pulses per quarter note OXI One sends through analog Clock Out.
- PPQ Clock In. Changes the pulses per quarter note OXI One sends through analog Clock In. (48,
24, 8, 4, 1)
- Send CC of muted tracks. If activated, muted tracks will still send CC information.
- TRS MIDI Thru. If activated, OXI will echo the MIDI messages received through TRS.
- USB MIDI Thru. If activated, OXI will echo the MIDI messages received through USB.
- MIDI In channel filtering. If ON, every sequencer will listen to its own MIDI channel. If OFF, the
selected sequencer will listen to any channel.
- MIDI scale note filtering. Input notes are quantized to the scale of the sequencer that receives
the event.
- MIDI CC Smoothing. If activated, CC values will be interpolated between consecutive steps. If
deactivated, CC values will be sent per step (stepped behavior).
- MIDI CC Smooth Factor. Changes the response curve of the interpolated CC values. The greater
this value, the smoother the modulation curves will be.
- Keyboard Arpeggiator velocity per note played. If ON, the keyboard arpeggiator will respect
the velocity of the notes at the time they were played. If OFF, the keyboard arpeggiator will apply
the current keyboard velocity when playing the notes.
- Loop Sync on release. Changes the behavior of the LOOP function when it’s released, SYNC
BAR: the sequence will continue on the next bar; SYNC BEAT, the sequence will continue on the
next beat or step; NO SYNC, the sequence will continue exactly when it’s released.
- Reset track length when clearing. If activated, the Sequencer or track length will be reseted to
16 steps when pressing Clear.
- Reset track time division when clearing. If activated, the Sequencer or track time division will
be reseted to 1/16 when pressing Clear.
- Pause enabled. If activated, OXI One transport will have Pause/Play behavior, if not, only Play.
- ARP behavior. Latched (or sequencer mode) or Normal (Non Latched)
To Next Page
Loading...