Pacojet 2 - 1 Warning

4
5
6 Handling the PACOJET 2 28
6.1 PACOJET 2 applications 28
6.2 Handling of fresh, frozen foods for pacotizing 28
6.2.1 Preparatory activities before pacotizing 28
6.2.2 Brief description of the pacotizing process 29
6.2.3 Detailed description of the pacotizing process 33
6.2.4 After a pacotizing cycle 36
6.3 Utilizing the machine to cut/chop fresh, non-frozen foods 37
6.3.1 Cutting/Chopping procedure 38
6.3.2 After the cutting/chopping procedure 39
6.4 Utilizingthemachineformixing/whippingfresh,liquidfoods 40
6.4.1 Mixing/Whipping procedure 40
6.4.2 After the mixing/whipping procedure 42
7 Cleaning PACOJET 2 43
7.1 General 43
7.2 Initial cleaning 43
7.3 Cleaning of the direct food contact zone 44
7.4 Detergent 45
7.5 Rinsing cycle procedure 45
7.6 Cleaning cycle procedure 47
7.7 Cleaning the depressurization hose 49
7.8 Cleaning the exterior of the machine 49
7.9 Cleaning accessories 50
8 What to do when 51
9 Information 53
9.1 Technical Data PACOJET 2 53
9.2 Accessories 54
9.3 Maintenance and technical service 54
9.4 Disposal and recycling 55
9.5 Warranty notes 55
9.6 PACOJET 2 declaration of conformity 55
Warning1
PACOJET 2 is a machine for commercial use. The a)
machine may only be operated by persons capable of
using it safely. Persons with reduced physical, sensory
or mental capacities, including those with physical or
mental disabilities, or persons lacking knowledge or
experience, such as children, may not operate the
machine.
PACOJET 2 may only be used in accordance with this b)
instruction manual. Failure to comply with the instruc-
tions can result in damage to the machine, risk of injury
to the operator or in the potential contamination of the
food preparations being processed.
Pacojet Coupe Set (available as an optional add-on, c)
see Sections 5.7.2, 5.7.3, 6.3 and 6.4): Refer to and
comply with the separate instruction manual, particu-
larly the safety warnings.
Use caution when unpacking PACOJET 2, as the ma-d)
chine is heavy in weight. Please note: two persons
should unpack the machine if possible to avoid bruis-
es or injury during the unpacking and set up process.
Some product parts have sharp edges.
Before operating the machine for the rst time, thee)
machine must receive an initial cleansing according to
section 7.2.
By virtue of its function, the pacotizing blade is very f)
sharp, thus it must be handled with special caution.
Refer to enclosure
Refer to enclosure
WARNING1