PACOM PDRH-8-RT - Specifications

Digital Video Recorder
69
System Upgrade Related Clip Copy Related
No. Description No. Description
302
Remote upgrade is not authorized.
14
Opening executable file failed.
303
Saving remote package failed.
15
Writing executable file failed.
304
Remote upgrade is cancelled by the user.
16
Creating image failed.
400
USB device mounting failed.
17
Burning failed.
401
Reading upgrade package on the USB device
failed.
18
Burning is out of time.
402
Copying upgrade package on the USB device
failed.
19
Connecting device failed.
403
USB device is not connected.
20
Device is busy.
404
USB device is being used.
21
Unsupported file system.
405
Unsupported file system.
22
Verify failed.
500
System is busy clip copying.
Specifications
VIDEO
Signal Format NTSC or PAL (Auto Detect)
Video Input Composite: 8 or 16 looping inputs, 1 Vp-p, auto-terminating, 75 Ohms
Monitor Outputs
Composite: 1 BNC, 1 Vp-p, 75 Ohms
SPOT: 1 BNC, 1 Vp-p, 75 Ohms
VGA: 1
Video Resolution
Composite: 720x480 (NTSC), 720x576 (PAL)
VGA: 800x600, 1024x768, 1280x1024 @ 60Hz
Record Speed
(images per second)
Real-time: 480ips (NTSC), 400ips (PAL) @ CIF
Playback Speed
(images per second)
Full Duplex: 480ips (NTSC), 400ips (PAL) @ CIF
INPUTS/OUTPUTS
Alarm Input
8 or 16 terminal, programmable as NC or NO, 2.4V (NC) or 0.3V (NO) threshold,
5VDC
Alarm Output 2 relay output, programmable as NC or NO, 2A@125VAC, 1A@30VDC
Alarm Reset Input 1 TTL, terminal block
Internal Buzzer 80dB at 10cm
Network Connectivity 10/100 Mbps Ethernet (RJ-45)
Audio Input RCA Input: 4 Line In
Audio Output RCA Output: 1, Line Out
Text Input POS Interface, ATM Interface