User Manual Appendix A
GFK-2749A Jan 2020
Product Certifications and Installation Guidelines for Conformance 80
Appendix A: Product Certifications and
Installation Guidelines for
Conformance
This appendix describes the compliance markings that appear on the PSM module and/or
Terminal Assembly and the corresponding standards to which they have been certified.
This appendix also provides installation requirements for conformance to standards and
additional safety guidelines for installing in the European Union.
A.1 Agency Approvals
Agency
Standard or
Marking
N.A. Safety for Generator Control
Equipment
Certification by Underwriter's Laboratories to
UL 6200 standard and equivalent CSA C22.2
No 14 -2010 standard
N.A. Safety for Process Control
Equipment
Certification by Underwriter's Laboratories to
UL 61010-1 standard and equivalent CSA
C22.2 No 61010-1standard
N.A. Safety for Hazardous Areas
Class I, Div. 2, Groups A, B, C, D
Certification by Underwriter's Laboratories to
ANSI/ISA 12.12.01 standard and equivalent
CSA C22.2 No 213-M1987 standard
Low Voltage Directive European
Safety for Industrial Control
Equipment
Self-Declaration in accordance with
European Directives; Refer to Declaration of
Conformity found at
http://www.Emerson.com/Industrial-
Automation-Controls for a complete list of
approved products
Electromagnetic Compatibility
Directive European EMC for
Industrial Control Equipment
Certification by Competent Body in
accordance with European Directives; Refer
to Declaration of Conformity found at
http://www.Emerson.com/Industrial-
Automation-Controls for a complete list of
approved products
To Next Page
Loading...
