Pakedge Device & Software WK-1 - WK-1 X Start up

pg. 21
WK-1x User Guide
3. Select Use the following IP Address and type the IP address and subnet mask, as in the example
below. (Be sure the IP address and subnet mask are on the same subnet as the WK-1x.)
WK-1x IP address: 192.168.1.250
PC IP address: 192.168.1.10
PC subnet mask: 255.255.255.0
WK-1x Start Up
To configure the WK-1x through a web browser, type the IP address of the WK-1x (default
192.168.1.250) and press Enter.
NOTE: Make sure the WK-1x and your computer are configured on the same subnet.
To configure the IP address of your computer, follow the steps in the previous section.