pg. 48
WK-1x User Guide
OPERATIONS
• Operation Modes:
o 2.4/5 GHz have independent operation modes
o Access Point/ WDS Bridge/WDS AP/Repeater
• Up to 16 SSIDs
• Supports 802.1q VLANs
• Spanning Tree Supports 802.1d Spanning Tree Protocol
• IP Auto-configuration – DHCP client
• Transmission rate options:
O 2.4 GHZ – B-ONLY, G-ONLY, B/G-MIXED, N-ONLY, G/N-MIXED, B/G/N-MIXED
O 5 GHZ – A-ONLY, N-ONLY, A/N MIXED, AC-ONLY, N/AC-MIXED, A/N/AC-MIXED
MANAGEMENT AND SECURITY
• User can adjust power by dBm
• Web-based configuration (HTTP)
• Upgrade firmware via web browser/internet
• Auto-channel selects the least congested channel
• Backup and restoration settings available through web interface
• QoS WMM
• WPA-PSK/WPA2-PSK/ WPA/WPA2 Mixed using TKIP or AES
• SSID broadcast can be enabled or disabled
• WLAN L2 Isolation (AP mode only)
• List of connected wireless clients available
To Next Page
Loading...
