pg. 3
WK-1x User Guide
Introduction
Thank you for purchasing the Pakedge WK-1x 802.11ac Dual Band Access Point.
As the central component of your wireless network,
the WK-1 provides you with high-speed, high-range
wireless AC networking. The WK-1x broadcasts on both the 2.4 GHz and 5 GHz band so that select devices
can choose their preferred source of wireless internet, improving the overall stability, reliability and
performance of the wireless network.
Each band (either 2.4 GHz or 5 GHz) of the WK-1x can operate in three modes:
• Access Point Mode: This is the typical configuration for most Wi-Fi networks, as shown below.
• WD
S Bridge Mode: This mode is used to send wireless internet to a hardwired device when you
cannot use an Ethernet cable directly. Let’s say you have a desktop computer in an isolated
portion of an old home and can’t run a cable through the whole house to get internet to that
specific computer.
WK-1
Laptop
Laptop
Tablet
Smartphone
Panel
To Next Page
Loading...
