EasyManua.ls Logo

Pakedge Device & Software WK-1 - SSID Configuration

Default Icon
57 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
pg. 31
WK-1x User Guide
Profile Name: Create a name for the security profile.
Encryption: Select an encryption type for your security profile. The four available options are, No
Encryption, WPA PSK, WPA2 PSK, and WPA/WPA2 PSK.
o No Encryption: This will leave your profile without security (not recommended).
o WPA PSK: Password must be at least 8 characters long. This is a legacy encryption
protocol (not recommended).
o WPA2 PSK: Password must be at least 8 characters long. AES-only encryption
(recommended).
o WPA/WPA2 PSK: Password must be at least 8 characters long. This feature is also known
as Mixed Mode and uses TKIP encryption.
NOTE: Passwords may only contain numbers and letters. Special characters are not
allowed. Examples of special characters: (!@#$%:;^&*).
Configuration
To configure SSIDs for both the 2.4 GHz and 5 GHz bands, go to the Configuration tab. The WK-1x can
set up to 8 SSIDs per band for a total of 16 SSIDs.

Related product manuals