pg. 33
WK-1x User Guide
Guest Network Settings
The Guest Network feature is designed for networks that do not have a guest VLAN. The Guest Network
acts as its own network and only has access to the internet. Each access point’s guest network is
independent from the guest networks of other access points.
To enable the Guest Network, select On/Off. By default, the guest network name is Pakedge-Guest and
the IP scheme is set to 192.168.200.X. You have the option to change the default settings, if desired. You
can change the SSID, IP address, subnet, starting IP address and ending IP address. Once changes are
complete, click Apply to save them.
SSID
• Radio: There is a guest network available on both the 2.4 GHz and 5 GHz band.
• On/Off: This option turns the Guest Network on and off.
• Wireless Name (SSID): The SSID of the Guest Network can be entered in this textbox.
To Next Page
Loading...
