pg. 52
WK-1x User Guide
Effective Warranty Date
This warranty begins on the effective date of delivery to the end user. For your convenience, keep the
original bill of sale as evidence of the purchase date from your authorized dealer.
Important- Warranty Registration
Please register your product at www.pakedge.com. It is imperative that Pakedge knows how to reach you
promptly if we should discover a safety problem or product update for which you must be notified. In
addition, you may be eligible for discounts on future upgrades as new networking standards come about.
To Obtain Service, Contact Your Pakedge Dealer.
Repairs made under the terms of the Limited Warranty covering your Pakedge product will be performed
by an Authorized Pakedge Service Center. These arrangements must be made through the selling
Pakedge Dealer. If this is not possible, contact Pakedge directly for further instructions. Prior to returning
a defective Product directly to Pakedge, you must obtain a Return Material Authorization number and
shipping instructions. Return shipping costs will be the responsibility of the owner.
For additional information about this warranty, visit our website at www.pakedge.com.
FCC Declaration of Conformity
Pakedge Device & Software, 3847 Breakwater Avenue, Hayward, CA 94545, declares under sole
responsibility that the WK-1x complies with 47 CFR Parts 2 and 15 of the FCC Rules as a Class B digital
device. This device complies with Part 15 of FCC Rules. Operation of the device is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference that may cause undesired operation.
FCC Compliance Class B Digital Device
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
To Next Page
Loading...
