Palfinger ILP 33 - Liftgate will not power on

ILP 25/33 Owner’s Manual
Rev.1.4 24
8.1 Liftgate will not power on.
1. Check the shut off switch.
Turn ON the ON/OFF switch located inside the vehicles cab (Truck) or on the dock bumper strut
(Trailer).
Strut
ON/OFF Switch
Location for Trucks
Rocker Switch
Toggle Switch
ON/OFF Switch
Location for Trailers
2. Check the circuit breaker at the main batteries.
Every truck has a circuit breaker on top of the main batteries or if you have an auxiliary battery kit as
shown in the illustration below, Fig 20.
If circuit breaker reset tab is exposed, push the tab back in as shown, Fig.21.
Circuit Breaker
Location
Buss
Bar
Battery or Battery Box Mount
Reset Tab
RESET
Circuit Breaker Needs to be Reset when Reset Tab is exposed
Fig.21
Fig.20