134
Maintenance Before Starting
Checking the Safety and Warning Devices
The safety devices of the tail lifts comply with the respective
current version of the valid regulations.
Before starting to drive, check whether all safety and warn-
ing devices are operational.
Renew any damaged and non-operational safety and warn-
ing devices.
Depending on the model, the safety and warning devices com-
prise:
• non-slip platform surface
• roll-off protection on the platform (optional)
• holding grip for the accompanying operator (not in scope of
delivery of the tail lift)
• warning flashers on the platform
• warning flags behind the platform
• platform interlock at the platform (optional)
• two-feet control for "lift" and "bring down" on the platform
• key control at lateral operating element for trailers or semi-
trailers
• control box with ON/OFF switch in lockable driver's cab
• visual signal at control box in driver's cab for tail lift "ON" and/
or platform open
• stop valves on lift and tilt cylinders to prevent line break (ex-
cept model E)
• flow valves for limiting the lowering and opening speed (ex-
cept model E)
Betriebsanleitung_Hubladebuehnen_EN.book Seite 134 Donnerstag, 15. August 2019 4:04 16
To Next Page
Loading...
