39
Switching Off the Tail Lift
The tail lift may only be switched off when the platform is closed
or folded in.
Depending on the model there are different ways to switch off
the tail lift:
• Switch in driver's cab
• Key control at lateral operating element
• Key code at lateral operating element
• Battery main switch
• Driver’s cab control system with camera system
To switch off the tail lift using the switch in the driver's cab:
Set the switch at the control box in the driver's cab to "OFF".
The visual signal indicating the operational readiness of the
tail lift extinguishes. The tail lift is switched off.
To switch off the tail lift using the key control (26) at the lateral
operating element:
Insert the key into the keyhole of the key control and turn it
counterclockwise.
Remove the key.
The visual signal indicating the operational readiness of the
tail lift extinguishes. The tail lift is switched off.
To switch off the tail lift using the key code at the lateral oper-
ating element:
Enter the key code using the Lift and Close pushbuttons
(see “Programming a Key Code” from p. 125).
The visual signal indicating the operational readiness of the
tail lift extinguishes. The tail lift is switched off.
CAUTION!
Risk of injury or material damage due to unlocked tail lift!
Persons can be injured or vehicles and objects in public road
traffic can be damaged if the tail lift folds out accidentally
during driving and sticks out into the moving traffic.
Before driving, lock the tail lift after folding in.
Make sure that the warning lights (25) in the driver's cab
are not lit.
Betriebsanleitung_Hubladebuehnen_EN.book Seite 39 Donnerstag, 15. August 2019 4:04 16
To Next Page
Loading...
Need help?
General
