99
Folding Out the Platform
Loosen the platform interlock (if present).
Press the toggle switch (54) downward and hold it in this
position until the torsion frame touches the ground.
Protect your hands with gloves.
Pull the handle with both hands to swivel the platform to the
horizontal position.
Pull the handle with both hands to unfold the folding part of
the platform.
Lowering the Platform
Press the toggle switch (54) downward and hold it in this
position until the platform reaches the ground tilt while
lowering.
Lifting the Platform
Press the toggle switch (54) upward and hold it in this posi-
tion until the platform reaches the loading position while
lifting.
Folding In the Platform
Make sure that the platform is in horizontal position
touching the ground.
Protect your hands with gloves.
Fold the platform tip onto the platform.
Close the platform interlock (if present).
Swivel the platform up to the roller at the support tube.
Betriebsanleitung_Hubladebuehnen_EN.book Seite 99 Donnerstag, 15. August 2019 4:04 16
To Next Page
Loading...
Need help?
General
