Pall Allegro 50 L User Manual

3
C
AUTION!
Avoid the use of sharp blades or pointed instruments that could damage the Allegro mixer
system and other system components.
Do not open the packaging by forcing any of the system components through the sealed end
because this can generate particulate contaminants.
E
nsure that the system selected is suitable for the application.
S
ingle-use systems used in the Allegro mixer range are designed for single use only.
4. Pictures and Schematics
4.1 Mixer Tote Pictures
Figure 1
Standard Allegro 50 L mixer with plastic tote
Figure 2
Standard Allegro 50 L mixer jacketed tote (as an alternative to the plastic tote)
Acrylic
(Perspex) Tote
Powder Bag/tubing
Support Frame
(optional)
Plastic Tote Door
Sensor Support
Bracket
Motor and Gear Box
4 Sided Jacket (Left,
Right, Rear and Bottom)
Hot/Cold
Fluid Outlet
Hot/Cold
Fluid Inlet
Hot/Cold
Fluid Low
Point Drain
User Control
Interface (UCI)
Lockable
Castors

Pall Allegro 50 L Specifications

General

Brand	Pall
Model	Allegro 50 L
Category	Laboratory Equipment
Language	English