Pall Allegro 50 L User Manual

www.pall.com/biopharm 14
8. Remove the cover (Note: Cover may not
look exactly as shown).
6.2 Installing the System
2. Turn on power and check that the power
light comes on.
WARNING!
Power must be ON to control bag
pressure during operation
1. Apply wheel locks to the mixer tote.
3. Open the door to the
Allegro 50 L mixer tote.
4. Push the white section at the
top of the single-use system
up through the hole in the lid
of the plastic or jacketed tote

Pall Allegro 50 L Specifications

General

Brand	Pall
Model	Allegro 50 L
Category	Laboratory Equipment
Language	English