Pall Allegro 50 L User Manual

15
5. Make sure the label of the single-
u
se mixer system is parallel with
t
he front of the tote
a
X
6. Check the ‘1 BAG’ light
is illuminated
7. Connect the ination and exhaust lines from
the single-use system to the hose barbs on
the User Control Interface (UCI)
WARNING!
Ination and exhaust lines MUST be
connected to appropriate ports and
be free from blockage or restriction to
ensure proper regulation of air pressure
during operation

Pall Allegro 50 L Specifications

General

Brand	Pall
Model	Allegro 50 L
Category	Laboratory Equipment
Language	English