Pall Allegro 50 L User Manual

www.pall.com/biopharm 16
8. Begin ination by switching the
‘
BAG INFLATION’ switch to ‘ON’.
G
as should now start to enter the
single-use mixer system
WARNING!
O
perator should be in
attendance throughout
steps 8 - 13
9. As the system inates the shaft
coupling will move towards the
bottom of the tote.
Align the shaft coupling, sample
line and outlet tubing with the
ports on the bottom of the tote
(see next picture).
10. As the system approaches full
ination. STOP ination by turning
the BAG INFLATION switch to the
‘OFF’ position to allow operator to
conduct steps 11 & 12.
Drive coupling port
Outlet tubing port
Outlet tubing port

Pall Allegro 50 L Specifications

General

Brand	Pall
Model	Allegro 50 L
Category	Laboratory Equipment
Language	English